BRCO Global EN

Satellite IoT

Extend connectivity for your assets beyond terrestrial coverage.

Cellular and satellite connectivity for sensors, mobile equipment, and infrastructure deployed in remote areas, along extended routes, or in maritime environments.

The architecture is designed around each application's data volume, power consumption, mobility, latency, and availability requirements. There is no single satellite solution for every asset.

Remote operationsIT and telecommunicationsBusiness continuityIoT integrators
Two solution profiles

Small data packets or higher-capacity connectivity.

The decision starts with application behavior, not the constellation name.

Low power and low data volume

Satellite LPWA

For sensors and assets that transmit small packets, operate under power constraints, or must remain deployed for long periods.

Best fit: tracking, basic telemetry, agriculture, livestock, metering, and environmental monitoring.

●

Small data volumes and periodic transmissions

●

Terrestrial or non-terrestrial LPWA technologies depending on the profile

●

Terrestrial or non-terrestrial LPWA technologies depending on the profile

●

Power consumption and reporting frequency defined by design

Medium or high data volume

Satellite Link

For routers, remote sites, and applications that require higher transfer capacity, alternative connectivity, or coverage extension beyond terrestrial networks.

Best fit: mining, energy, remote sites, operational mobility, and backup connectivity subject to design.

●

Satellite terminal or router depending on the service

●

Cellular and satellite architecture when supported by the profile

●

GEO or LEO according to coverage, latency, and required capacity

●

Continuity or backup option defined and validated per project

Selection criteria

The right architecture balances five variables.

The goal is not to use more technology, but to select the profile that matches the asset's actual behavior.

01

Data

Message size, frequency, bursts, files, and expected growth.

02

Power

Battery, permanent power, sleep cycles, and required autonomy.

03

Mobility

Fixed asset, vehicle, vessel, cargo, or equipment moving between regions.

04

Latency

Deferred telemetry, interactive operation, or near-real-time response.

05

Availability

Primary coverage, geographic reach, and backup or operational continuity options.

Resultado: un diseño alineado al caso de uso, al terminal y al costo operativo, evitando sobredimensionar una aplicación de bajo consumo o limitar una operación que necesita mayor capacidad.

GEO, LEO, and converged connectivity

The right satellite profile for each operation.

GEO and LEO behave differently. Selection depends on coverage, latency, capacity, terminal, mobility, and commercial availability.

GEO

Broad coverage and stable geometry

Geostationary satellites maintain an apparently fixed position. They can provide stable connections for fixed locations or broad regions, typically with higher latency than a LEO solution.

LEO

Lower latency and higher capacity in selected services

Low Earth orbit constellations can reduce latency and provide higher data rates, subject to coverage, terminal, antenna, visibility, and the contracted plan.

HYBRID

Terrestrial and satellite networks within the same use case

Some compatible profiles allow cellular and non-terrestrial networks to be combined. Link selection or transition depends on the device, firmware, SIM, coverage, and contracted service; it should not be assumed to be universal or always seamless.

Technical scope. This page focuses on GEO, LEO, and converged profiles available for IoT. Enabled technologies and constellations are confirmed during the assessment.

Use cases

Connectivity for assets beyond the normal reach of mobile networks.

A single industry may require LPWA for sensors and Satellite Link for routers or higher-capacity sites.

Mining, energy, and infrastructure

Remote operations and sites

Telemetry, distributed equipment, solar or wind farms, pipelines, stations, camps, and temporary sites.

Logistics, mobility, and maritime

Assets traveling long distances

Containers, trains, fleets, cargo, and vessels crossing areas with irregular or unavailable terrestrial coverage.

Agriculture, environment, and sensors

Low-power telemetry

Livestock, agriculture, environmental stations, and distributed metering across large or hard-to-reach areas.

Continuity and remote sites

Alternative link by design

Complementary connectivity for locations where a terrestrial outage may affect operations and the profile supports backup.

Centralized operations

Simpler management when services are integrated.

When the contracted profile integrates cellular and satellite connectivity, operations can be commercially and technically consolidated to reduce the complexity of managing separate services.

A coordinated experience.

Available modules depend on the solution and contract, but the goal is to maintain a coherent view of the service.

Dashboard

Lines, status, usage, alerts, and groups when integrated into the contracted profile.

Enabled APIs

Integration with customer applications and processes through the interfaces available for the service.

Commercial and technical coordination

One coordination point when services are part of an integrated offering.

Imagen

Responsible scope. “One platform” or “one contract” applies only when the selected services are available within the integrated profile. Providers, terminals, regions, and billing may vary by project.

From use case to pilot

Validate connectivity before scaling.

The assessment combines application, terminal, antenna, location, sky visibility, power, traffic, and continuity expectations.

  • Data, frequency, power, mobility, latency, locations, and required availability.
  • Terminal, antenna, cellular or satellite profile, coverage, integration, and controlled pilot.
  • Activation, documentation, connectivity management, usage, and support according to contract.

I agree to the processing of my personal data according to the privacy policy.